Nail Plates & Hangers
Duro Dyne is offering a variety of Nail Plates and Hangers. All of these products are made in the U.S.A. with
U.S.A. steel.
Stud Guards
▪ 16 ga & 18ga cold rolled steel or galvanized steel (depending on market availability)
▪ Self-Nailing fang style and flat style
Stud Guards Submittal >
BOCA Nail Plates
▪ 16 ga cold rolled steel or galvanized steel (depending on market availability)
▪ Rounded safety corners
▪ Available as standard or Self-Nailing
▪ Additional hole patterns available
1.5" Nail Plates
▪ 16 ga cold rolled steel or galvanized steel (depending on market availability)
▪ Rounded safety corners
▪ Additional hole patterns available
3" x 18" Nail Plates
▪ 16 ga cold rolled steel or galvanized steel (depending on market availability)
▪ Rounded safety corners
▪ Additional hole patterns available
3 x 18" Nail Plates Submittal >
3" Nail Plates
▪ 16 ga cold rolled steel or galvanized steel (depending on market availability)
▪ Rounded safety corners
▪ Additional hole patterns available
5" x 18" Nail Plates
▪ 16 ga cold rolled steel or galvanized steel (depending on market availability)
▪ Rounded safety corners
▪ Additional hole patterns available
5 x 18" Nail Plates Submittal >
5" Nail Plates
▪ 16 ga cold rolled steel or galvanized steel (depending on market availability)
▪ Rounded safety corners
Z Brackets
▪ 18 ga galvanized steel
▪ .75'' wide
▪ Rounded safety corners
▪ Central slot for initial
duct adjustment before
final attachment
Gas Pipe Hangers
▪ 16 ga galvanized steel
▪ Structural perforations for dual length or single length use
▪ Infinite adjustability for easy installation
Multi-Duct 'L' Bracket
The L Bracket from Duro Dyne is a versatile tool for use in hanging
ductwork in residential applications. This sturdy 18 Gauge bracket
easily screws in ductwork and ceiling anchors to provide quick
attachment points.
▪ 18 ga galvanized steel
▪ 1'' scribe for proper placement on wrapped duct
▪ Rounded safety corners
Multi-Duct 'L' Bracket Lit Sheet >
Multi-Duct L Bracket Submittal >
Rapit Duct Support Hanger
The Rapit Duct Support Hanger from Duro Dyne is manufactured with a durable body design in 26/28
gauge steel to support a high load rating. The precise angles create a smooth telescoping action.
Telescoping allows for widths of 11-19'' or 18 to 33'' in tabbed and pointed styles. All Rapid Duct Support
Hangers feature a pre-drilled mounting hole to immobilize the telescoping and secure the bracket to duct.
The Rapit 'Point' Duct Support style features an integral 18 gauge self-nailing tip that is an integral part of
the bracket, not spot welded on. It penetrates dense wood easily.
The Rapit 'Tabbed' style is offered with or without a captive screw.
Rapit Duct Support Hanger Lit Sheet >
Rapit Duct Support Hanger Submittal >
