Super Metal-Fab®
For Industrial/Commercial Applications
Super Metal-Fab is constructed of material to provide for
special commercial duct systems. Very large equipment
can cause excessive vibration. To compensate for this,
a wider fabric is used to eliminate the transmission of
vibration to the duct.
Gauge: 24 Galvanized
Dimensions:3" metal - 6" fabric - 3" metal
Fabrics Supplied: Durolon, Excelon, Neoprene, Glasseal, Thermafab
Seam: Grip Loc
Fabric Features
| Durolon UL Certified File# R4462 | ||
|---|---|---|
| DESCRIPTION | SPECIFICATIONS | FEATURES |
| Color: White Base Fabric: Woven Fiberglass Coating: Hypalon |
Weight: 30±2 oz. per square yard Tensile Strength: 475 lbs. / 375 lbs. Tear Strength: 20 lbs. x 20 lbs. Low Temp: -40°F High Temp (Continuous): 250°F |
•Excellent ozone resistance •Excellent resistance to weathering •Best overall acid resistance •Recommended for rooftop applications •Unaffected by mildew |
| EXCELON® UL Classified File# R4462 | ||
|---|---|---|
| DESCRIPTION | SPECIFICATIONS | FEATURES |
| Color: *Black or #Spec Chek Orange Base Fabric: Woven Nylon/Polyester Blend Coating: Vinyl |
Weight: Commercial Grade - 22 oz./sq. yd. Residential Grade - 17 oz./sq. yd. Tensile Strength: 240 lbs. x 220 lbs. Tear Strength: 100 lbs. x 100 lbs. Low Temp: -40°F High Temp (Continuous): 180°F |
·Excellent water resistance ·Excellent tear strength ·Excellent all purpose fabric ·Unaffected by mildew |
| NEOPRENE (Standard Grade) UL Classified File# R4462 | ||
|---|---|---|
| DESCRIPTION | SPECIFICATIONS | FEATURES |
| Color: Black Base Fabric: Woven Fiberglass Coating: Neoprene |
Weight: 22 oz./sq. yd. Tensile Strength: 500 lbs. x 500 lbs. Tear Strength: 13 lbs. x 13 lbs. Low Temp: -40°F High Temp (Continuous): 200°F |
·Extremely resistant to alkalies & gasoline ·Excellent on systems exposed to toxic fumes ·Good general purpose fabric ·Unaffected by mildew |
| Glasseal UL Classified File# R4462 | ||
|---|---|---|
| DESCRIPTION | SPECIFICATIONS | FEATURES |
| Color: Grey & Black Base Fabric: Woven Fiberglass Coating: Vinyl |
Weight: 16 oz./sq. yd. Tensile Strength: 90 lbs. x 90 lbs. Tear Strength: 8 lbs. x 9 lbs. Low Temp: -40°F High Temp (Continuous): 180°F |
·Good, low cost ·Resistant to acids & chemical fumes ·Resistant to grease & alkalies ·Unaffected by mildew |
| Thermafab® UL Classified File# R4462 | ||
|---|---|---|
| DESCRIPTION | SPECIFICATIONS | FEATURES |
| Color: Grey Base Fabric: Woven Fiberglass Coating: Silicon Rubber |
Weight: 17 oz./sq. yd. Tensile Strength: 200 lbs. x 150 lbs. Tear Strength: 50 lbs. x 40 lbs. Low Temp: -65°F High Temp (Continuous): 500°F |
∙Excellent high temp. resistance ·Excellent low temp. resistance ·Excellent chemical resistance ·Extremely low smoke emission ·Excellent ozone resistance ·Excellent resistance to weathering ·Unaffected by mildew |
